Fits – B6.1 | B74 | B6.2 | B6.3 | B74.1w/ bushing and 2mm spacer
Strength, performance and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium items replace the standard parts and feature a light-weight design and with built-in threads are more easily adjustable than their counterparts. The 7mm hex based design allows adjustment with the most popular wrench in the R/C arsenal but also tapers down featuring the Fin treatment found on the JConcepts turnbuckles.
Included with the stand-offs, the white in color Delrin pivot bushings are top-notch. The bushings are precision machined to slide on and off the titanium and allow the shocks floating freedom and just the correct amount of fore and aft movement. The bushings are asymmetrical; one-side features a taller shoulder which should be positioned toward the shock tower position on the vehicle. This taller shoulder helps maintain the shock in the correct position without falling back on to the stand-off itself.
The Fin stand-offs are lightweight, and the original design brings out the glamour and quality that makes titanium one of the most sought after exotic materials in the world. The 2-piece set includes two 3x8mm BHCS to secure the stand-offs to the shock tower. In addition, the set includes two aluminum washers, 2mm in thickness, which allow the titanium to be adjusted and used on the F&R of the B6.1 and B74 vehicles. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.
The stand-off is a direct bolt-on part to the Team Associated B6 and B74 vehicles.
• Direct fit for the F&R tower on the B6 | B74 vehicles• Original JConcepts design and “Fin” styling• High-grade, machined titanium material• 7mm Hex base material for ease of adjustment• Built-in threads for weight reduction• 3x8mm BHCS hardware included• Aluminum 2mm spacer for adjustable length• Machined Delrin pivot bushings• Aesthetic jewelry